Models

WDF-2
WDF-3

Features

  • Fully insulated for maximum efficiency and energy savings
  • Removable S/S hinged lid
  • Factory applied gasket—makes installation a snap and seals units to the counter top, thus eliminating seepage
  • Ideal for frozen dessert or use it as a mug or plate chiller
  • 1-Year Parts & Labor Warranty
  • NSF Certified and UL Listed

Certifications

NSFAtlas Metal UL 39F7 Custom Built FSE

WDF – ICE CREAM FREEZER (Refrigerated, Self-Contained)

Frost Tops & Freezers

The WDF series ice cream deep freezer lets you bring the profitability of reach-in ice cream service to your serving line. Ideal for ice cream or any frozen dessert, this drop-in can be installed in virtually any counter and is fully self-contained—just plug it in and turn it on.

The pan is fully insulated for maximum efficiency and energy savings, and is provided with a factory applied gasket so that it can be installed in the finest wood fixtures without marring the counter top. The interior is constructed of stainless steel. The deep freezer is also perfect for a beer mug or salad plate chiller and can be specified with a Plexiglass lid.

Models

WDF-2
WDF-3

Features

  • Fully insulated for maximum efficiency and energy savings
  • Removable S/S hinged lid
  • Factory applied gasket—makes installation a snap and seals units to the counter top, thus eliminating seepage
  • Ideal for frozen dessert or use it as a mug or plate chiller
  • 1-Year Parts & Labor Warranty
  • NSF Certified and UL Listed

Certifications

NSFAtlas Metal UL 39F7 Custom Built FSE

Specifications

Top: Constructed of 18 gauge, type 304 stainless steel, die stamped with a raised perimeter bead. There shall be a solid vinyl gasket under the beaded edge to form a seal to the counter top, thus preventing seepage or marring the counter top.

Liner: The inner liner shall be 18 gauge, type 304 stainless steel, one piece construction, all welded, ground and polished to a uniform finish. All corners are coved with a minimum 1/4″ radius on the horizontal edges and a minimum 3/4″ radius on the vertical edges. The liner has copper tubing firmly soldered to the exterior sides and bottom. The unit is provided with an all stainless steel insulated, hinged, life off lid, with plastic coated pulls.

Insulation: The unit is fully insulated with high density polystyrene, 2-1/2″ thick on all sides, and enclosed with a 22 gauge galvanized steel outer liner.

Refrigeration: The compressor housing shall be fabricated from 14 gauge galvanized and bolted to the base of the unit. A fully self-contained condensing unit is provided with a hermetically sealed compressor and a thermostat control. The system is fully charged with CFC-free refrigerant and ready to operate.

Note: Proper ventilation must be provided in counter.

Electrical: The unit will be wired for 15 amp, 120 volt, single phase operation, with an on/off thermostat switch and pilot light. A 6′-long, 3-wired cord and plug (NEMA 5-15P) will be provided.

Rendering

*Model Shown: WDF-3 – Not representative of final product

Resources

Options

Have equipment questions?

Top: Constructed of 18 gauge, type 304 stainless steel, die stamped with a raised perimeter bead. There shall be a solid vinyl gasket under the beaded edge to form a seal to the counter top, thus preventing seepage or marring the counter top.

Liner: The inner liner shall be 18 gauge, type 304 stainless steel, one piece construction, all welded, ground and polished to a uniform finish. All corners are coved with a minimum 1/4″ radius on the horizontal edges and a minimum 3/4″ radius on the vertical edges. The liner has copper tubing firmly soldered to the exterior sides and bottom. The unit is provided with an all stainless steel insulated, hinged, life off lid, with plastic coated pulls.

Insulation: The unit is fully insulated with high density polystyrene, 2-1/2″ thick on all sides, and enclosed with a 22 gauge galvanized steel outer liner.

Refrigeration: The compressor housing shall be fabricated from 14 gauge galvanized and bolted to the base of the unit. A fully self-contained condensing unit is provided with a hermetically sealed compressor and a thermostat control. The system is fully charged with CFC-free refrigerant and ready to operate.

Note: Proper ventilation must be provided in counter.

Electrical: The unit will be wired for 15 amp, 120 volt, single phase operation, with an on/off thermostat switch and pilot light. A 6′-long, 3-wired cord and plug (NEMA 5-15P) will be provided.

*Model Shown: WDF-3 – Not representative of final product

find your personal solution
Contact Us

RECEIVE THE ATLAS UPDATE NEWSLETTER