Models

CARF-2
CARF-3
CARF-4
CARF-5
CARF-6

Features

  • “Quick,” frost top, stands 1″ above counter for attractive display—ideal for pre-plated foods
  • Fully insulated for maximum efficiency and energy savings
  • Self-contained refrigeration system—just plug it in and turn it on
  • Positive self-locking device—keeps tops level and equipment in place
  • Fully mobile—each unit is provided with 5″ dia. swivel casters, two with brakes
  • Versatile—available in a wide range of sizes and a wide variety of finishes and colors
  • 1-Year Parts & Labor Warranty
  • NSF Approved
  • UL Listed

Certifications

Classified UL EPH Custom FSE 3523Atlas Metal UL 39F7 Custom Built FSE

CARF – COLD FOOD UNITS (Refrigerated Frost Top)

CA Series

The frost cart provides the most attractive way of displaying your pre-plated cold foods. The unit frosts over quickly, provided a bed of snow—the perfect setting for salads and desserts. The unit is fully self-contained and can be located anywhere in your serving line—just plug it in and turn it on.

The attractive streamlined design, plus the variety of laminates, give you a wide range of choices to complement any decor. The unmatched feature of the CA-Cart line is the self-locking device which eliminates loose fasteners or molding strips to lock units together. Simply push the units together; the carts will automatically lock and the top will be flush and level, regardless of the floor’s condition. It’s the right cart for your serving line needs.

Models

CARF-2
CARF-3
CARF-4
CARF-5
CARF-6

Features

  • “Quick,” frost top, stands 1″ above counter for attractive display—ideal for pre-plated foods
  • Fully insulated for maximum efficiency and energy savings
  • Self-contained refrigeration system—just plug it in and turn it on
  • Positive self-locking device—keeps tops level and equipment in place
  • Fully mobile—each unit is provided with 5″ dia. swivel casters, two with brakes
  • Versatile—available in a wide range of sizes and a wide variety of finishes and colors
  • 1-Year Parts & Labor Warranty
  • NSF Approved
  • UL Listed

Certifications

Classified UL EPH Custom FSE 3523Atlas Metal UL 39F7 Custom Built FSE

Specifications

Top: Constructed of 16 gauge, type 304 stainless steel, die-formed, welded, ground and polished. Top is provided with an opening to receive the appropriate sized drop-in cold serving unit. An integral locking device shall be provided to align and retain cart positioning when two or more carts are joined.

Body: Frame construction shall be of hi-tensile aluminum square tubing, 1-1/4″ x 1-1/4″. Frame sections are welded construction, ground and polished to a uniform finish. Body is complete with front panel of plastic laminate on .050 aluminum. Owner to specify finish.

Refrigerated Frost Top: The cart is complete and includes a WF series drop-in refrigerated frost top installed in the top. Constructed of 18 gauge, type 304 stainless steel, with raised perimeter bead and solid vinyl gasket. Frost top is 16 gauge stainless steel and has copper tubing firmly soldered to the exterior bottom; insulated with 1-1/2″ of high density polystyrene and enclosed with an 18 gauge galvanized steel outer liner. The top stands 1″ above the counter top and is surrounded by 1/2″ full perimeter gutter to collect melted condensate; a 1/2″ IPS drain is provided.

Refrigeration System: The compressor housing shall be fabricated from formed angles and bolted to the base of the unit. A fully self-contained condensing unit is provided, with hermetically sealed compressor and a thermostat control. The system is fully charged with CFC-free refrigerant and ready to operate.

Electrical: The unit will be wired for 15 amp, 120 volt, single phase operation with an on/off thermostat switch and pilot light. A 6′ long, 3-wire cord and plug (NEMA 5-15ISP) will be provided.

Casters: The casters shall be 5″ dia. non-marking rubber tired, swivel type with balls bearings, in both swivel and axle raceways, and provided with grease fittings. Both casters on operator’s side have foot-activated brakes.

Rendering

*Model Shown: CARF-4 – Not representative of final product

Resources

Options

Have equipment questions?

Top: Constructed of 16 gauge, type 304 stainless steel, die-formed, welded, ground and polished. Top is provided with an opening to receive the appropriate sized drop-in cold serving unit. An integral locking device shall be provided to align and retain cart positioning when two or more carts are joined.

Body: Frame construction shall be of hi-tensile aluminum square tubing, 1-1/4″ x 1-1/4″. Frame sections are welded construction, ground and polished to a uniform finish. Body is complete with front panel of plastic laminate on .050 aluminum. Owner to specify finish.

Refrigerated Frost Top: The cart is complete and includes a WF series drop-in refrigerated frost top installed in the top. Constructed of 18 gauge, type 304 stainless steel, with raised perimeter bead and solid vinyl gasket. Frost top is 16 gauge stainless steel and has copper tubing firmly soldered to the exterior bottom; insulated with 1-1/2″ of high density polystyrene and enclosed with an 18 gauge galvanized steel outer liner. The top stands 1″ above the counter top and is surrounded by 1/2″ full perimeter gutter to collect melted condensate; a 1/2″ IPS drain is provided.

Refrigeration System: The compressor housing shall be fabricated from formed angles and bolted to the base of the unit. A fully self-contained condensing unit is provided, with hermetically sealed compressor and a thermostat control. The system is fully charged with CFC-free refrigerant and ready to operate.

Electrical: The unit will be wired for 15 amp, 120 volt, single phase operation with an on/off thermostat switch and pilot light. A 6′ long, 3-wire cord and plug (NEMA 5-15ISP) will be provided.

Casters: The casters shall be 5″ dia. non-marking rubber tired, swivel type with balls bearings, in both swivel and axle raceways, and provided with grease fittings. Both casters on operator’s side have foot-activated brakes.

*Model Shown: CARF-4 – Not representative of final product

find your personal solution
Contact Us

RECEIVE THE ATLAS UPDATE NEWSLETTER