Models

CATR-4
CATR-5

Features

  • Self-contained refrigeration system—just plug it in and turn it on
  • Refrigerated base for back up storage
  • Fully insulated for maximum efficiency and energy savings
  • Positive self-locking device—keeps tops level and equipment in place
  • Fully mobile—each unit is provided with 5″ dia. swivel casters, two with brakes
  • Versatile—available in a wide variety of finishes and colors
  • 1-Year Parts & Labor Warranty
  • UL Listed

Certifications

Classified UL EPH Custom FSE 3523Atlas Metal UL 39F7 Custom Built FSE

CATR – COLD FOOD UNITS (Solid Top with Refrigerated Base)

CA Series

The solid cart refrigerated base provides an extra utility top, work top, or display area with the convenience of a refrigerated base. Right where you need it most—at your fingertips. The unit is fully self-contained and can be located anywhere in your serving line—just plug it in and turn it on.

The attractive streamlined design, plus the variety of laminates give you a wide range of choices to complement any decor. The unmatched feature of the CA-Cart line is the self-locking device which eliminates loose fasteners or molding strips to lock units together. Simply push the units together the carts will automatically lock and the top will be flush and level, regardless of the floor’s condition. It’s the right cart for your serving line needs.

Models

CATR-4
CATR-5

Features

  • Self-contained refrigeration system—just plug it in and turn it on
  • Refrigerated base for back up storage
  • Fully insulated for maximum efficiency and energy savings
  • Positive self-locking device—keeps tops level and equipment in place
  • Fully mobile—each unit is provided with 5″ dia. swivel casters, two with brakes
  • Versatile—available in a wide variety of finishes and colors
  • 1-Year Parts & Labor Warranty
  • UL Listed

Certifications

Classified UL EPH Custom FSE 3523Atlas Metal UL 39F7 Custom Built FSE

Specifications

Top: Solid top, constructed of 16 gauge, type 304 stainless steel, die-formed, welded, ground and polished to a uniform finish. An integral locking device shall be provided to align and retain car positioning when to or more carts are joined.

Body: Frame construction shall be of hi-tensile aluminum square tubing, 1-1/4″ x 1-1/4″. Frame sections are welded construction, ground and polished to a uniform finish. Body is complete with front panel of plastic laminate on .050 aluminum. Owner to specify finish.

Refrigerated Base: Double wall constructed with a 20 gauge, type 304 stainless steel interior liner, with coved corners. Cart body forms the exterior of the base with an 18 gauge stainless steel facia on operator’s side. The unit is insulated with 1″ of high density polystyrene on all sides. The interior is provided with a slide assembly to accommodate 12″ x 20″ pans. A 2-1/2″ dial thermometer is mounted in the facia. Doors are double wall constructed of 18 gauge, type 304 stainless steel, full insulated with high density polyurethane and provided with edge mounted, chrome plated hinges and a slam action latch. Doors are complete with a moisture-proof gasket.

Electrical Base: The unit will be wired for 15 amps., 120 volt, single phase operation with an/off thermostat switch and pilot light. A 6′-long, 3-wire cord and plug (NEMA 5-15P) will be provided.

Casters: The casters shall be 5″ dia. non-marking rubber tired, swivel type with ball bearings, in both swivel and axle raceways, and provided with grease fittings. Both casters on operator’s side have foot-activated brakes.

Rendering

*Model Shown: CATR-4 – Not representative of final product

Resources

Options

Have equipment questions?

Top: Solid top, constructed of 16 gauge, type 304 stainless steel, die-formed, welded, ground and polished to a uniform finish. An integral locking device shall be provided to align and retain car positioning when to or more carts are joined.

Body: Frame construction shall be of hi-tensile aluminum square tubing, 1-1/4″ x 1-1/4″. Frame sections are welded construction, ground and polished to a uniform finish. Body is complete with front panel of plastic laminate on .050 aluminum. Owner to specify finish.

Refrigerated Base: Double wall constructed with a 20 gauge, type 304 stainless steel interior liner, with coved corners. Cart body forms the exterior of the base with an 18 gauge stainless steel facia on operator’s side. The unit is insulated with 1″ of high density polystyrene on all sides. The interior is provided with a slide assembly to accommodate 12″ x 20″ pans. A 2-1/2″ dial thermometer is mounted in the facia. Doors are double wall constructed of 18 gauge, type 304 stainless steel, full insulated with high density polyurethane and provided with edge mounted, chrome plated hinges and a slam action latch. Doors are complete with a moisture-proof gasket.

Electrical Base: The unit will be wired for 15 amps., 120 volt, single phase operation with an/off thermostat switch and pilot light. A 6′-long, 3-wire cord and plug (NEMA 5-15P) will be provided.

Casters: The casters shall be 5″ dia. non-marking rubber tired, swivel type with ball bearings, in both swivel and axle raceways, and provided with grease fittings. Both casters on operator’s side have foot-activated brakes.

*Model Shown: CATR-4 – Not representative of final product

find your personal solution
Contact Us

RECEIVE THE ATLAS UPDATE NEWSLETTER