Models

CADF-2
CADF-3

Features

  • Deep freeze capacity - fully insulated for maximum efficiency and energy savings
  • Self-contained refrigeration system—just plug it in and turn it on
  • Positive self-locking device—keeps tops level and equipment in place
  • Fully mobile—each unit is provided with 5″ dia. swivel casters, two with brakes
  • Versatile—available in a wide range of sizes and a wide variety of finishes and colors
  • 1-Year Parts & Labor Warranty
  • NSF Approved
  • UL Listed

Certifications

Classified UL EPH Custom FSE 3523Atlas Metal UL 39F7 Custom Built FSE

CADF – ICE CREAM UNITS (Reach-In)

CA Series

The ice cream carts let your bring the profitability of reach-in ice cream service to your serving line. Ideal for ice cream or any frozen dessert, this unit can be located anywhere in your serving line. It’s fully self-contained—just plug it in and turn it on.

The attractive streamline design, plus the variety of laminates give you a wide range of choices to complement any decor. The unmatched feature of the CA-Cart line is the self-locking device which eliminates loose fasteners or molding strips to lock units together. Simply push the units together; the carts will automatically lock and the top will be flush and level, regardless of the floor’s condition. It’s the right cart for your serving line needs.

Models

CADF-2
CADF-3

Features

  • Deep freeze capacity - fully insulated for maximum efficiency and energy savings
  • Self-contained refrigeration system—just plug it in and turn it on
  • Positive self-locking device—keeps tops level and equipment in place
  • Fully mobile—each unit is provided with 5″ dia. swivel casters, two with brakes
  • Versatile—available in a wide range of sizes and a wide variety of finishes and colors
  • 1-Year Parts & Labor Warranty
  • NSF Approved
  • UL Listed

Certifications

Classified UL EPH Custom FSE 3523Atlas Metal UL 39F7 Custom Built FSE

Specifications

Top: Constructed of 16 gauge, type 304 stainless steel, die-formed, welded, ground and polished. Top is provided with an opening to receive the appropriate sized drop-in cold serving unit. An integral locking device shall be provided to align and retain cart positioning when two or more carts are joined.

Body: Frame construction shall be of hi-tensile aluminum square tubing, 1-1/4″ x 1-1/4″. Frame sections are welded construction, ground and polished to a uniform finish. Body is complete with front panel of plastic laminate on .050 aluminum. Owner to specify finish.

Deep Freeze Compartment: The cart is complete and includes a WDF series drop-in deep freezer installed in the top. Constructed of 18 gauge, type 304 stainless steel with raised perimeter bead and solid vinyl gasket. The unit is fully insulated with 2-1/2″ of high density polystyrene on all sides and enclosed with a 22 gauge galvanized steel outer liner. The inner liner has copper tubing firmly soldered to its exterior. The unit is provided with a double pan, insulated lid with a rubber, self-insulating hinge. The entire lid is removable.

Refrigeration System: The compressor housing shall be fabricated from formed angles and bolted to the base of the unit. A fully self-contained condensing unit is provided, with hermetically sealed compressor and a thermostat control. The system is fully charged with CFC-free refrigerant and ready to operate.

Electrical: The unit will be wired for 15 amp, 120 volt, single phase operation with an on/off switch and pilot light. A 6′-long, 3-wire cord and plug (NEMA 5-15P) will be provided.

Casters: The casters shall be 5″ dia. non-marking rubber tired, swivel type with ball bearings, in both swivel and axle raceways, and provided with grease fittings. Both casters on operator’s side have foot-activated brakes.

Rendering

*Model Shown: CADF-3 – Not representative of final product

Resources

Options

Have equipment questions?

Top: Constructed of 16 gauge, type 304 stainless steel, die-formed, welded, ground and polished. Top is provided with an opening to receive the appropriate sized drop-in cold serving unit. An integral locking device shall be provided to align and retain cart positioning when two or more carts are joined.

Body: Frame construction shall be of hi-tensile aluminum square tubing, 1-1/4″ x 1-1/4″. Frame sections are welded construction, ground and polished to a uniform finish. Body is complete with front panel of plastic laminate on .050 aluminum. Owner to specify finish.

Deep Freeze Compartment: The cart is complete and includes a WDF series drop-in deep freezer installed in the top. Constructed of 18 gauge, type 304 stainless steel with raised perimeter bead and solid vinyl gasket. The unit is fully insulated with 2-1/2″ of high density polystyrene on all sides and enclosed with a 22 gauge galvanized steel outer liner. The inner liner has copper tubing firmly soldered to its exterior. The unit is provided with a double pan, insulated lid with a rubber, self-insulating hinge. The entire lid is removable.

Refrigeration System: The compressor housing shall be fabricated from formed angles and bolted to the base of the unit. A fully self-contained condensing unit is provided, with hermetically sealed compressor and a thermostat control. The system is fully charged with CFC-free refrigerant and ready to operate.

Electrical: The unit will be wired for 15 amp, 120 volt, single phase operation with an on/off switch and pilot light. A 6′-long, 3-wire cord and plug (NEMA 5-15P) will be provided.

Casters: The casters shall be 5″ dia. non-marking rubber tired, swivel type with ball bearings, in both swivel and axle raceways, and provided with grease fittings. Both casters on operator’s side have foot-activated brakes.

*Model Shown: CADF-3 – Not representative of final product

find your personal solution
Contact Us

RECEIVE THE ATLAS UPDATE NEWSLETTER