Models

PDH-TA

Features

  • Field adjustable for different weights
  • All stainless steel construction
  • High-impact plastic guide posts to align plates
  • Thermally protected fan motor for heat circulation

PDH-TA SERIES – DROP-IN DISH DISPENSERS (Thermal Air Heating)

Self-Leveling Dispensers

The basic unit shall be constructed of 300 series stainless steel. The dispensers shall be a drop-in, self-leveling design.

The counter top flange has three, high impact, plastic guide posts to align plates. The unit is self-supporting, with vertical side panels and a bottom and top flange all welded to form the dispenser body. The stainless steel dispenser head will be suspended from the extension springs to support the stack of plates to be dispensed.

Models

PDH-TA

Features

  • Field adjustable for different weights
  • All stainless steel construction
  • High-impact plastic guide posts to align plates
  • Thermally protected fan motor for heat circulation

Specifications

PDH-TA: Basic construction with the addition of a base mounted, thermally protected fan motor and heating element (for heat circulation), side mounted thermostat, an additional stainless steel shield which covers the spring mechanism and vertical channel guides, flange mounted pilot light and on/off switch. A 6′ 16-3 cord set, NEMA 5-15P, will be provided.

Self-Leveling: The spring mechanism is easy to adjust. A combination of extension springs will be provided for field adjusting to the required dispensing height.

Rendering

*Model Shown: PDH-TA – Not representative of final product

Resources

Options

Have equipment questions?

PDH-TA: Basic construction with the addition of a base mounted, thermally protected fan motor and heating element (for heat circulation), side mounted thermostat, an additional stainless steel shield which covers the spring mechanism and vertical channel guides, flange mounted pilot light and on/off switch. A 6′ 16-3 cord set, NEMA 5-15P, will be provided.

Self-Leveling: The spring mechanism is easy to adjust. A combination of extension springs will be provided for field adjusting to the required dispensing height.

*Model Shown: PDH-TA – Not representative of final product

find your personal solution
Contact Us

RECEIVE THE ATLAS UPDATE NEWSLETTER