Models

INFHB-3
INFHB-4
INFHB-5

Features

  • Individual, thermostatically controlled 12” x 20” hot food wells – fully insulated to retain heat
  • Heated base section – provides back-up storage directly on the serving line
  • Positive self locking device – keeps tops level and equipment in place
  • Fully mobile – each unit is provided with 5” dia. swivel casters, two with brakes
  • Versatile – available in three convenient sizes and a wide variety of finishes and colors
  • Wet or Dry operation
  • UL Listed

Certifications

Classified UL EPH Custom FSE 3523Atlas Metal UL 39F7 Custom Built FSE

INFHB – HOT SERVING UNITS (Individual Controls & Heated Base)

INFINITI Fit

With striking, yet highly durable features like 16-gauge stainless steel tops and "locking horn" technology, INFINITI FIT is built to evolve with your operation. Choose and customize what you need now, and then easily add it later.

Models

INFHB-3
INFHB-4
INFHB-5

Features

  • Individual, thermostatically controlled 12” x 20” hot food wells – fully insulated to retain heat
  • Heated base section – provides back-up storage directly on the serving line
  • Positive self locking device – keeps tops level and equipment in place
  • Fully mobile – each unit is provided with 5” dia. swivel casters, two with brakes
  • Versatile – available in three convenient sizes and a wide variety of finishes and colors
  • Wet or Dry operation
  • UL Listed

Certifications

Classified UL EPH Custom FSE 3523Atlas Metal UL 39F7 Custom Built FSE

Specifications

Top: Constructed of 16 gauge, type 304 stainless steel, die-formed, welded, ground and polished. The top is provided with an opening to receive the appropriately sized drop-in unit.

Body: Frame construction shall be of hi-tensile stainless steel square tub-ing, 1-1/4″ x 1-1/4″. Frame sections are welded construction, ground and pol-ished to a uniform finish. Body & panel is constructed from 18 gauge stainless steel with 1/16” thick plastic laminate Front & ends. rear aprons is constructed fron 16 gauge stainless steel with 1/16” thick plastic laminate fin-ish. Owner to specify finish. An integral locking device shall be provided to align and retain cart positioning when two or more carts are joined.

Hot Food Pan: The cart includes a WIH series built-in hot pan installed in the top. Constructed of 18 gauge, type 304 stainless steel, with a raised perimeter bead and solid vinyl gasket. Individual 12” x 20” hot food wells are provided, fabricated of 18 gauge stainless steel, one piece construction, all welded, ground and polished to a uniform finish. All corners are coved with a minimum 1/4” radius. The pan is fully insulated with high density fiberglass insulation, 1” thick on all sides, 2” thick on the bottom and enclosed with a 22 gauge galvanized steel outer case.

Heated Base: HB Series: Constructed of 20 gauge, type 304 stainless steel interior with coved corners and an 18 gauge stainless steel fascia. The cart body forms the exterior walls and there is 1″ of high density fiberglass in-sulation provided. The interior is provided with a removable slide assembly to accommodate 12″ x 20″ pans.Doors are stainless steel, double wall constructed, fully insulated and provided with edge mounted chrome plated hinges, a slam action latch and a moisture proof gasket. A dial thermometer is included.

Electrical: The unit is provided with 850 watt heating elements, pre-wired to individual thermostat controls, with a pilot light for each thermostat. A 6’ long, 3-wire cord and plug is provided, extending from the control box located under the unit, on operator’s left.

Casters: The casters shall be 4” diameter, non-marking rubber tired, swivel type with ball bearings in both swivel and axle raceways, provided with grease fittings. Both casters on operator’s side have toe activated brakes.

Rendering

*Model Shown: INFHB-DME-3 – Not representative of final product

Resources

Options

Have equipment questions?

Top: Constructed of 16 gauge, type 304 stainless steel, die-formed, welded, ground and polished. The top is provided with an opening to receive the appropriately sized drop-in unit.

Body: Frame construction shall be of hi-tensile stainless steel square tub-ing, 1-1/4″ x 1-1/4″. Frame sections are welded construction, ground and pol-ished to a uniform finish. Body & panel is constructed from 18 gauge stainless steel with 1/16” thick plastic laminate Front & ends. rear aprons is constructed fron 16 gauge stainless steel with 1/16” thick plastic laminate fin-ish. Owner to specify finish. An integral locking device shall be provided to align and retain cart positioning when two or more carts are joined.

Hot Food Pan: The cart includes a WIH series built-in hot pan installed in the top. Constructed of 18 gauge, type 304 stainless steel, with a raised perimeter bead and solid vinyl gasket. Individual 12” x 20” hot food wells are provided, fabricated of 18 gauge stainless steel, one piece construction, all welded, ground and polished to a uniform finish. All corners are coved with a minimum 1/4” radius. The pan is fully insulated with high density fiberglass insulation, 1” thick on all sides, 2” thick on the bottom and enclosed with a 22 gauge galvanized steel outer case.

Heated Base: HB Series: Constructed of 20 gauge, type 304 stainless steel interior with coved corners and an 18 gauge stainless steel fascia. The cart body forms the exterior walls and there is 1″ of high density fiberglass in-sulation provided. The interior is provided with a removable slide assembly to accommodate 12″ x 20″ pans.Doors are stainless steel, double wall constructed, fully insulated and provided with edge mounted chrome plated hinges, a slam action latch and a moisture proof gasket. A dial thermometer is included.

Electrical: The unit is provided with 850 watt heating elements, pre-wired to individual thermostat controls, with a pilot light for each thermostat. A 6’ long, 3-wire cord and plug is provided, extending from the control box located under the unit, on operator’s left.

Casters: The casters shall be 4” diameter, non-marking rubber tired, swivel type with ball bearings in both swivel and axle raceways, provided with grease fittings. Both casters on operator’s side have toe activated brakes.

*Model Shown: INFHB-DME-3 – Not representative of final product

find your personal solution
Contact Us

RECEIVE THE ATLAS UPDATE NEWSLETTER