Models

INFIHOT-2
INFIHOT-3
INFIHOT-4
INFIHOT-5
INFIHOT-6

Features

  • Fully insulated to retain heat – individual, thermostatically controlled 12” x 20” hot food wells
  • Positive self-locking device – keeps tops level and equipment in place
  • Fully mobile – each unit is provided with 4” dia. swivel casters, two with brakes
  • Versatile – available in a wide range of sizes and a wide variety of finishes and colors
  • US – Undershelf, S/S, removable
  • Wet or dry operation
  • NSF Approved, UL Listed

Certifications

Classified UL EPH Custom FSE 3523Atlas Metal UL 39F7 Custom Built FSE

INFIHOT – HOT SERVING UNITS (Single Control With Offset Top)

INFINITI Fit

With striking, yet highly durable features like 16-gauge stainless steel tops and "locking horn" technology, INFINITI FIT is built to evolve with your operation. Choose and customize what you need now, and then easily add it later.

Models

INFIHOT-2
INFIHOT-3
INFIHOT-4
INFIHOT-5
INFIHOT-6

Features

  • Fully insulated to retain heat – individual, thermostatically controlled 12” x 20” hot food wells
  • Positive self-locking device – keeps tops level and equipment in place
  • Fully mobile – each unit is provided with 4” dia. swivel casters, two with brakes
  • Versatile – available in a wide range of sizes and a wide variety of finishes and colors
  • US – Undershelf, S/S, removable
  • Wet or dry operation
  • NSF Approved, UL Listed

Certifications

Classified UL EPH Custom FSE 3523Atlas Metal UL 39F7 Custom Built FSE

Specifications

Top: Constructed of 16 gauge, type 304 stainless steel, die-formed, welded, ground and polished. The top is provided with an opening to receive the appropriately sized drop-in unit.

Body: Frame construction shall be of hi-tensile stainless steel square tubing, 1-1/4″ x 1-1/4″. Frame sections are welded construction, ground and polished to a uniform finish. Body & panel is constructed from 18 gauge stainless steel with 1/16” thick plastic laminate Front & ends. rear aprons is constructed from 16 gauge stainless steel with 1/16” thick plastic laminate finish. Owner to specify finish. An integral locking device shall be provided to align and retain cart positioning when two or more carts are joined.

Hot Food Pan: The cart includes a WIH series built-in hot pan installed in the top. Constructed of 18 gauge, type 304 stainless steel, with a raised perimeter bead and solid vinyl gasket.1” offset top will accommodate 18” x 26” bun pans. Individual 12” x 20” hot food wells are provided, fabricated of 18 gauge stainless steel, one piece construction, all welded, ground and polished to a uniform finish. All corners are coved with a minimum 1/4” radius. The pan is fully insulated with high density fiberglass insulation, 1” thick on all sides, 2” thick on the bottom and enclosed with a 22 gauge galvanized steel outer case.

Electrical: The unit is provided with 850 watt heating elements, pre-wired to individual thermostat controls, with a pilot light for each well. A 6’ long, 3-wire cord and plug is provided, extending from the control box located under the unit, on operator’s left. Bottom of outer case can be removed for access to electrical components.

Casters: The casters shall be 4” diameter, non-marking rubber tired, swivel type with ball bearings in both swivel and axle raceways, provided with grease fittings. Both casters on operator’s side have toe activated brakes.

Rendering

*Model Shown: INFIH-OT-DME-3-AF – Not representative of final product

Resources

Options

Have equipment questions?

Top: Constructed of 16 gauge, type 304 stainless steel, die-formed, welded, ground and polished. The top is provided with an opening to receive the appropriately sized drop-in unit.

Body: Frame construction shall be of hi-tensile stainless steel square tubing, 1-1/4″ x 1-1/4″. Frame sections are welded construction, ground and polished to a uniform finish. Body & panel is constructed from 18 gauge stainless steel with 1/16” thick plastic laminate Front & ends. rear aprons is constructed from 16 gauge stainless steel with 1/16” thick plastic laminate finish. Owner to specify finish. An integral locking device shall be provided to align and retain cart positioning when two or more carts are joined.

Hot Food Pan: The cart includes a WIH series built-in hot pan installed in the top. Constructed of 18 gauge, type 304 stainless steel, with a raised perimeter bead and solid vinyl gasket.1” offset top will accommodate 18” x 26” bun pans. Individual 12” x 20” hot food wells are provided, fabricated of 18 gauge stainless steel, one piece construction, all welded, ground and polished to a uniform finish. All corners are coved with a minimum 1/4” radius. The pan is fully insulated with high density fiberglass insulation, 1” thick on all sides, 2” thick on the bottom and enclosed with a 22 gauge galvanized steel outer case.

Electrical: The unit is provided with 850 watt heating elements, pre-wired to individual thermostat controls, with a pilot light for each well. A 6’ long, 3-wire cord and plug is provided, extending from the control box located under the unit, on operator’s left. Bottom of outer case can be removed for access to electrical components.

Casters: The casters shall be 4” diameter, non-marking rubber tired, swivel type with ball bearings in both swivel and axle raceways, provided with grease fittings. Both casters on operator’s side have toe activated brakes.

*Model Shown: INFIH-OT-DME-3-AF – Not representative of final product

find your personal solution
Contact Us

RECEIVE THE ATLAS UPDATE NEWSLETTER