Models

MOPD2
MOPD2H
MOPD3
MOPD3H
MOPD4
MOPD4H

Features

  • Field adjustable
  • Capacity up to 72 plates or 36 bowls (capacity may vary depending on plate or bowl manufacturer)
  • UL Commercial Food Warmer label applies to heated units only
  • NSF approved

Certifications

Atlas Metal UL 39F7 Custom Built FSENSF

MOPD SERIES – MOBILE OPEN DISH DISPENSERS (2, 3 or 4 Stack)

Self-Leveling Dispensers

The MOPD series frame shall be constructed of 1″ stainless steel tubing, welded to a 16 gauge stainless steel upper and lower deck, with heavy-duty reinforcements to support the weight of the dish tubes. The heated MOPD frame shall have in addition a receptacle attached to the underside of the upper deck with a six foot cord set.

Models

MOPD2
MOPD2H
MOPD3
MOPD3H
MOPD4
MOPD4H

Features

  • Field adjustable
  • Capacity up to 72 plates or 36 bowls (capacity may vary depending on plate or bowl manufacturer)
  • UL Commercial Food Warmer label applies to heated units only
  • NSF approved

Certifications

Atlas Metal UL 39F7 Custom Built FSENSF

Specifications

Dispensing Tube Unheated: The basic unit shall be constructed of 300 series stainless steel, the counter top flange has three, high-impact plastic guide posts to align plates, the unit is self-supporting using a formed stainless steel flange welded to vertical channels and a bottom disc, stainless steel platform will be suspended with extension springs to support the stack of plates to be dispensed. With an additional stainless steel jacket to cover spring mechanism and channel guides.

Dispensing Tube Heated: Same construction with the addition of a base mounted heating element, a side mounted thermostat, pilot light and on/off switch located in the top flange, a 6′ 120V NEMA 5-15P cord set.

Self-Leveling: The spring mechanism is easy to adjust. A combination of extension springs will be provided for field adjustment to the required dispensing height.

Rendering

*Model Shown: MOPD-3H – Not representative of final product

Resources

Options

Have equipment questions?

Dispensing Tube Unheated: The basic unit shall be constructed of 300 series stainless steel, the counter top flange has three, high-impact plastic guide posts to align plates, the unit is self-supporting using a formed stainless steel flange welded to vertical channels and a bottom disc, stainless steel platform will be suspended with extension springs to support the stack of plates to be dispensed. With an additional stainless steel jacket to cover spring mechanism and channel guides.

Dispensing Tube Heated: Same construction with the addition of a base mounted heating element, a side mounted thermostat, pilot light and on/off switch located in the top flange, a 6′ 120V NEMA 5-15P cord set.

Self-Leveling: The spring mechanism is easy to adjust. A combination of extension springs will be provided for field adjustment to the required dispensing height.

*Model Shown: MOPD-3H – Not representative of final product

find your personal solution
Contact Us

RECEIVE THE ATLAS UPDATE NEWSLETTER