Models

INFFT-1
INFFT-2
INFFT-3
INFFT-4
INFFT-5
INFFT-6

Certifications

Classified UL EPH Custom FSE 3523Atlas Metal UL 39F7 Custom Built FSE

INFFT – SOLID TOP UTILITY UNITS

INFINITI Fit

Models

INFFT-1
INFFT-2
INFFT-3
INFFT-4
INFFT-5
INFFT-6

Certifications

Classified UL EPH Custom FSE 3523Atlas Metal UL 39F7 Custom Built FSE

Specifications

Top: Constructed of 16 gauge, type 304 stainless steel, die-formed, welded, ground and polished.

Body: Frame construction shall be of hi-tensile stainless steel square tub-ing, 1-1/4″ x 1-1/4″. Frame sections are welded construction, ground and pol-ished to a uniform finish. Front & end panel is constructed from 18 gauge stainless steel with 1/16” thick plastic laminate. Rear aprons is constructed from 16 gauge stainless steel with 1/16” thick plastic laminate finish. Owner to specify finish. And 18 gauge stainless steel removable undershelf is included. An integral locking device shall be provided to align and retain cart position-ing when two or more carts are joined.

Casters: The casters shall be 4” diameter, non-marking rubber tired, swivel type with ball bearings in both swivel and axle raceways, provided with grease fittings. Both casters on operator’s side have toe activated brakes.

Rendering

*Model Shown: INFFT-3 – Not representative of final product

Resources

Options

Have equipment questions?

Top: Constructed of 16 gauge, type 304 stainless steel, die-formed, welded, ground and polished.

Body: Frame construction shall be of hi-tensile stainless steel square tub-ing, 1-1/4″ x 1-1/4″. Frame sections are welded construction, ground and pol-ished to a uniform finish. Front & end panel is constructed from 18 gauge stainless steel with 1/16” thick plastic laminate. Rear aprons is constructed from 16 gauge stainless steel with 1/16” thick plastic laminate finish. Owner to specify finish. And 18 gauge stainless steel removable undershelf is included. An integral locking device shall be provided to align and retain cart position-ing when two or more carts are joined.

Casters: The casters shall be 4” diameter, non-marking rubber tired, swivel type with ball bearings in both swivel and axle raceways, provided with grease fittings. Both casters on operator’s side have toe activated brakes.

*Model Shown: INFFT-3 – Not representative of final product

find your personal solution
Contact Us

RECEIVE THE ATLAS UPDATE NEWSLETTER