Models

BLC-2-RM-BU
BLC-3-RM-BU
BLC-4-RM-BU
BLC-5-RM-BU
BLC-6-RM-BU

Features

  • Fully insulated for maximum efficiency and energy savings
  • Self contained refrigeration system—just plug it in and turn it on
  • Front and End Skirts with recessed casters
  • CAM LOCK™ locking device—keeps tops level and equipment in place
  • Fully mobile—each unit is provided with 5″ dia. swivel casters, two with brakes
  • Available in a wide range of plastic laminate panels, polyurethane enamel and powder coated frames and panels to blend with any decor
  • Total versatility—available in variety of lengths
  • Rear Sliding Doors, S/S, removable, with laminate
  • 1-Year Parts & Labor Warranty
  • UL Listed

Certifications

UL ANSI/NSF #7 9F94Classified UL EPH Custom FSE 3523Atlas Metal UL 39F7 Custom Built FSE

BLC-RM-BU – REFRIGERATED COLD PAN UNITS (3" Recessed Top; NSF-7)

BL Series

For Buffet Style with Enclosed Base and No Bottom Shelf. Designed to keep salads, desserts and other chilled foods crisp and appetizing. Your customers will see, taste and come back for the difference.

A wide range of attractive plastic laminate colors is available, or urethane painted panels to blend with any decor.

Quality construction provides years of reliable service. Complete reliability—use as an individual unit or joined in a continuous serving line with our exclusive CAM LOCK™ system.

Models

BLC-2-RM-BU
BLC-3-RM-BU
BLC-4-RM-BU
BLC-5-RM-BU
BLC-6-RM-BU

Features

  • Fully insulated for maximum efficiency and energy savings
  • Self contained refrigeration system—just plug it in and turn it on
  • Front and End Skirts with recessed casters
  • CAM LOCK™ locking device—keeps tops level and equipment in place
  • Fully mobile—each unit is provided with 5″ dia. swivel casters, two with brakes
  • Available in a wide range of plastic laminate panels, polyurethane enamel and powder coated frames and panels to blend with any decor
  • Total versatility—available in variety of lengths
  • Rear Sliding Doors, S/S, removable, with laminate
  • 1-Year Parts & Labor Warranty
  • UL Listed

Certifications

UL ANSI/NSF #7 9F94Classified UL EPH Custom FSE 3523Atlas Metal UL 39F7 Custom Built FSE

Specifications

Top: Constructed of 16 gauge, type 304 stainless steel, die-formed, welded, ground and polished to a uniform finish. The top includes a rolled front and rear edge.

Body: Frame construction shall be of hi-tensile aluminum square tubing, 1- 1/4″, with 3-3/4″ extruded, vertical radius corners on the front and rear. Frame sections are all welded construction, ground and polished to a uniform finish. Body is complete with front and end panels of .050 aluminum, and an 8-5/8″ rear apron of .090 aluminum, all covered with plastic laminate, with stainless steel sliding rear doors covered in plastic laminate. Owner to specify laminate selection. A CAM LOCK™ locking system is included with each unit to align and retain cart positioning when two or more units are joined.

Refrigerated Cold Pan: The cart includes a refrigerated cold pan, with 3″ recess, 9″ deep overall, built into the top, constructed of 18 gauge, type 304 stainless steel. The pan is fully insulated with high density polystyrene, 1″ thick on all sides, 2″ thick on the bottom, and enclosed with a 22 gauge galvanized steel outer case. The interior liner is fabricated with 1/4″ radius covered corners. The liner has copper tubing firmly soldered to the top 3″ on all sides. A 3/4″ dia. drain with strainer, 4″ PVC nipple and valve is provided. Separator channels & inserts to hold 12″ x 2″ food pans are included.

Refrigeration System: The compressor housing shall be fabricated from formed 14 gauge galvanized and bolted to the base of the unit. A fully self-contained condensing unit is provided with a hermetically sealed compressor and a digital electronic thermostat/thermometer. The system is fully charged with CFC-free refrigerant and ready to operate.

Electrical: The unit will be wired for 15 amp, 120 volt, single phase operation, with an on/off thermostat switch and pilot light. A 6′-long, 3-wire cord and plug (NEMA-5-15P) will be provided.

Casters: NSF approved, 5″ dia. non-marking rubber tired, swivel plate casters with grease fittings. Both casters on operator’s side have foot-activated brakes.

Rendering

*Model Shown: BLC-RM-BU-3 – Not representative of final product

Resources

Options

Have equipment questions?

Top: Constructed of 16 gauge, type 304 stainless steel, die-formed, welded, ground and polished to a uniform finish. The top includes a rolled front and rear edge.

Body: Frame construction shall be of hi-tensile aluminum square tubing, 1- 1/4″, with 3-3/4″ extruded, vertical radius corners on the front and rear. Frame sections are all welded construction, ground and polished to a uniform finish. Body is complete with front and end panels of .050 aluminum, and an 8-5/8″ rear apron of .090 aluminum, all covered with plastic laminate, with stainless steel sliding rear doors covered in plastic laminate. Owner to specify laminate selection. A CAM LOCK™ locking system is included with each unit to align and retain cart positioning when two or more units are joined.

Refrigerated Cold Pan: The cart includes a refrigerated cold pan, with 3″ recess, 9″ deep overall, built into the top, constructed of 18 gauge, type 304 stainless steel. The pan is fully insulated with high density polystyrene, 1″ thick on all sides, 2″ thick on the bottom, and enclosed with a 22 gauge galvanized steel outer case. The interior liner is fabricated with 1/4″ radius covered corners. The liner has copper tubing firmly soldered to the top 3″ on all sides. A 3/4″ dia. drain with strainer, 4″ PVC nipple and valve is provided. Separator channels & inserts to hold 12″ x 2″ food pans are included.

Refrigeration System: The compressor housing shall be fabricated from formed 14 gauge galvanized and bolted to the base of the unit. A fully self-contained condensing unit is provided with a hermetically sealed compressor and a digital electronic thermostat/thermometer. The system is fully charged with CFC-free refrigerant and ready to operate.

Electrical: The unit will be wired for 15 amp, 120 volt, single phase operation, with an on/off thermostat switch and pilot light. A 6′-long, 3-wire cord and plug (NEMA-5-15P) will be provided.

Casters: NSF approved, 5″ dia. non-marking rubber tired, swivel plate casters with grease fittings. Both casters on operator’s side have foot-activated brakes.

*Model Shown: BLC-RM-BU-3 – Not representative of final product

find your personal solution
Contact Us

RECEIVE THE ATLAS UPDATE NEWSLETTER