Models

INFRF-2
INFRF-3
INFRF-4
INFRF-5
INFRF-6

Features

  • “Quick,” frost top, stands 1” above counter for attractive display – ideal for pre-plated foods
  • Fully insulated for maximum efficiency and energy savings
  • Self-contained refrigeration system – just plug it in and turn it on
  • Positive self-locking device – keeps tops level and equipment in place
  • Fully mobile – each unit is provided with 5” dia. swivel casters, two with brakes
  • US – Undershelf, S/S, removable
  • Versatile – available in a wide range of sizes and a wide variety of finishes and colors
  • NSF Approved, UL Listed

Certifications

Classified UL EPH Custom FSE 3523Atlas Metal UL 39F7 Custom Built FSE

INFRF – REFRIGERATED SERVING UNITS (Frost Top)

INFINITI Fit

Models

INFRF-2
INFRF-3
INFRF-4
INFRF-5
INFRF-6

Features

  • “Quick,” frost top, stands 1” above counter for attractive display – ideal for pre-plated foods
  • Fully insulated for maximum efficiency and energy savings
  • Self-contained refrigeration system – just plug it in and turn it on
  • Positive self-locking device – keeps tops level and equipment in place
  • Fully mobile – each unit is provided with 5” dia. swivel casters, two with brakes
  • US – Undershelf, S/S, removable
  • Versatile – available in a wide range of sizes and a wide variety of finishes and colors
  • NSF Approved, UL Listed

Certifications

Classified UL EPH Custom FSE 3523Atlas Metal UL 39F7 Custom Built FSE

Specifications

Top: Constructed of 16 gauge, type 304 stainless steel, die-formed, welded, ground and polished. The top is provided with an opening to receive the appropriately sized drop-in unit.

Body: Frame construction shall be of hi-tensile stainless steel square tubing, 1-1/4″ x 1-1/4″. Frame sections are welded construction, ground and polished to a uniform finish. Body & panel is constructed from 18 gauge stainless steel with 1/16” thick plastic laminate Front & ends. rear aprons is constructed fron 16 gauge stainless steel with 1/16” thick plastic laminate finish. Owner to specify finish. An integral locking device shall be provided to align and retain cart positioning when two or more carts are joined.

Refrigerated Frost Top: The cart includes a WF series built-in refrigerated frost top installed in the top. Constructed of 18 gauge, type 304 stainless steel, with a raised perimeter bead and solid vinyl gasket. The frost top (plate) is 14 gauge stainless steel with copper tubing firmly soldered to the exterior bottom. The unit is fully insulated with high density fiberglass and polystyrene, 1-1/2” thick, and enclosed with an 18 gauge galvanized steel outer case. The top stands 1” above the counter top and is surrounded by a 1/2” full perimeter gutter to collect melted condensate. A 1” IPS drain is provided.

Refrigeration: The compressor housing shall be fabricated from formed 14 gauge galvanized and bolted to the base of the unit. A fully self-contained condensing unit is provided with a hermetically sealed compressor and an on/off toggle switch. The system is fully charged with CFC free refrig-erant and ready to operate.

Electrical: The unit is pre-wired for 15 amps., 120 volt, single phase operation, with an on/off switch and pilot light. A 6′ long, 3-wire cord and plug (NEMA 5-15P) will be provided.

Casters: The casters shall be 4” diameter, non-marking rubber tired, swivel type with ball bearings in both swivel and axle raceways, provided with grease fittings. Both casters on operator’s side have toe activated brakes.

Rendering

*Model Shown: INFRF-3 – Not representative of final product

Resources

Options

Have equipment questions?

Top: Constructed of 16 gauge, type 304 stainless steel, die-formed, welded, ground and polished. The top is provided with an opening to receive the appropriately sized drop-in unit.

Body: Frame construction shall be of hi-tensile stainless steel square tubing, 1-1/4″ x 1-1/4″. Frame sections are welded construction, ground and polished to a uniform finish. Body & panel is constructed from 18 gauge stainless steel with 1/16” thick plastic laminate Front & ends. rear aprons is constructed fron 16 gauge stainless steel with 1/16” thick plastic laminate finish. Owner to specify finish. An integral locking device shall be provided to align and retain cart positioning when two or more carts are joined.

Refrigerated Frost Top: The cart includes a WF series built-in refrigerated frost top installed in the top. Constructed of 18 gauge, type 304 stainless steel, with a raised perimeter bead and solid vinyl gasket. The frost top (plate) is 14 gauge stainless steel with copper tubing firmly soldered to the exterior bottom. The unit is fully insulated with high density fiberglass and polystyrene, 1-1/2” thick, and enclosed with an 18 gauge galvanized steel outer case. The top stands 1” above the counter top and is surrounded by a 1/2” full perimeter gutter to collect melted condensate. A 1” IPS drain is provided.

Refrigeration: The compressor housing shall be fabricated from formed 14 gauge galvanized and bolted to the base of the unit. A fully self-contained condensing unit is provided with a hermetically sealed compressor and an on/off toggle switch. The system is fully charged with CFC free refrig-erant and ready to operate.

Electrical: The unit is pre-wired for 15 amps., 120 volt, single phase operation, with an on/off switch and pilot light. A 6′ long, 3-wire cord and plug (NEMA 5-15P) will be provided.

Casters: The casters shall be 4” diameter, non-marking rubber tired, swivel type with ball bearings in both swivel and axle raceways, provided with grease fittings. Both casters on operator’s side have toe activated brakes.

*Model Shown: INFRF-3 – Not representative of final product

find your personal solution
Contact Us

RECEIVE THE ATLAS UPDATE NEWSLETTER