Models

CARM-2
CARM-3
CARM-4
CARM-5
CARM-6

Features

  • Fully insulated for maximum efficiency and energy savings
  • Self-contained refrigeration system—just plug it in and turn it on
  • Positive self-locking device—keeps tops level and equipment in place
  • Fully mobile—each unit is provided with 5″ dia. swivel casters, two with brakes
  • Versatile—available in a wide range of sizes and a wide variety of finishes and colors
  • 1-Year Parts & Labor Warranty
  • UL Listed

Certifications

UL ANSI/NSF #7 9F94Classified UL EPH Custom FSE 3523Atlas Metal UL 39F7 Custom Built FSE

CARM – COLD FOOD UNITS (Refrigerated Cold Pan with 3" Recessed Top; NSF-7)

CA Series

The refrigerated cold cart eliminates the mess and expense of ice in your cold food display and can be located anywhere in your serving line. The standard depth is 9″. The cold pan accommodates standard 12″ x 20″ pans, or fractional size pans with the use of adapter bars.

The attractive streamlined design, plus the variety of laminates give you a wide range of choices to complement and decor. The unmatched feature of the CA-Cart line is the self-locking device which eliminates loose fasteners or molding trips to lock units together. Simply push the units together; the carts will automatically lock and the top will be flush and level, regardless of the floor’s condition. It’s the right cart for your serving line needs.

Models

CARM-2
CARM-3
CARM-4
CARM-5
CARM-6

Features

  • Fully insulated for maximum efficiency and energy savings
  • Self-contained refrigeration system—just plug it in and turn it on
  • Positive self-locking device—keeps tops level and equipment in place
  • Fully mobile—each unit is provided with 5″ dia. swivel casters, two with brakes
  • Versatile—available in a wide range of sizes and a wide variety of finishes and colors
  • 1-Year Parts & Labor Warranty
  • UL Listed

Certifications

UL ANSI/NSF #7 9F94Classified UL EPH Custom FSE 3523Atlas Metal UL 39F7 Custom Built FSE

Specifications

Top: Constructed of 16 gauge, type 304 stainless steel, die-formed, welded, ground and polished, top is provided with an opening to receive the appropriate sized drop-in cold serving unit. An integral locking device shall be provided to align and retain cart positioning when two or more carts are joined.

Body: Frame construction shall be of hi-tensile aluminum square tubing, 1-1/4″ x 1-1/4″. Frame sections are welded construction, ground and polished to a uniform finish. Body is complete with front panel of plastic laminate on .050 to aluminum. Owner to specify finish.

Refrigerated Cold Pan: The cart is complete and includes a WCM series drop-in refrigerated cold pan installed in the top. Constructed of 18 gauge, type 304 stainless steel, with raised perimeter bead and solid vinyl gasket. The pan is fully insulated with high density polystyrene, 1″ thick on all sides, 1-1/2″ thick on the bottom and enclosed by a 22 gauge galvanized steel outer liner. The interior liner is fabricated with 1/4″ radius coved corners. The liner has copper tubing firmly soldered to the top 3″ of all sides. A 3/4″ dia. drain with strainer, 4″ PVC nipple. and valve is provided.

Refrigerated System: The compressor housing shall be fabricated from formed angles and bolted to the base of the unit. A fully self-contained condensing unit is provided, with hermetically sealed compressor and a thermostat control. The system is fully charged, with CFC-free refrigerant and ready to operate.

Electrical: The unit will be wired for 15 amp, 120 volt, single phase operation with an/off thermostat switch and pilot light. A 6′-long, 3-wire cord and plug (NEMA 5-15P) will be provided.

Casters: The casters shall be 5″ dia. non-marking rubber tired, swivel type with ball bearings, in both swivel and axle raceways, and provided with grease fittings. Both casters on operator’s side have foot-activated brakes.

Rendering

*Model Shown: CARM-4 – Not representative of final product

Resources

Options

Have equipment questions?

Top: Constructed of 16 gauge, type 304 stainless steel, die-formed, welded, ground and polished, top is provided with an opening to receive the appropriate sized drop-in cold serving unit. An integral locking device shall be provided to align and retain cart positioning when two or more carts are joined.

Body: Frame construction shall be of hi-tensile aluminum square tubing, 1-1/4″ x 1-1/4″. Frame sections are welded construction, ground and polished to a uniform finish. Body is complete with front panel of plastic laminate on .050 to aluminum. Owner to specify finish.

Refrigerated Cold Pan: The cart is complete and includes a WCM series drop-in refrigerated cold pan installed in the top. Constructed of 18 gauge, type 304 stainless steel, with raised perimeter bead and solid vinyl gasket. The pan is fully insulated with high density polystyrene, 1″ thick on all sides, 1-1/2″ thick on the bottom and enclosed by a 22 gauge galvanized steel outer liner. The interior liner is fabricated with 1/4″ radius coved corners. The liner has copper tubing firmly soldered to the top 3″ of all sides. A 3/4″ dia. drain with strainer, 4″ PVC nipple. and valve is provided.

Refrigerated System: The compressor housing shall be fabricated from formed angles and bolted to the base of the unit. A fully self-contained condensing unit is provided, with hermetically sealed compressor and a thermostat control. The system is fully charged, with CFC-free refrigerant and ready to operate.

Electrical: The unit will be wired for 15 amp, 120 volt, single phase operation with an/off thermostat switch and pilot light. A 6′-long, 3-wire cord and plug (NEMA 5-15P) will be provided.

Casters: The casters shall be 5″ dia. non-marking rubber tired, swivel type with ball bearings, in both swivel and axle raceways, and provided with grease fittings. Both casters on operator’s side have foot-activated brakes.

*Model Shown: CARM-4 – Not representative of final product

find your personal solution
Contact Us

RECEIVE THE ATLAS UPDATE NEWSLETTER